This website uses cookies

Read our Privacy policy and Terms of use for more information.

❝

Welcome to Tri-Cities Central, a twice-weekly newsletter highlighting local happenings in Batavia, Geneva, St. Charles, and surrounding communities.

Get yours: subscribe here. Refer a friend: share this link.

Under a jeweler’s microscope, a tiny gemstone can look as big as a car. It was through this perspective that Mark Yingst, when he was a student at jewelry school, discovered how light moved through each facet of the stone. 

He’s been chasing that light ever since.

Yingst, of St. Charles, is a certified bench jeweler and gem cutter whose favorite style of work is recutting. His path to the cutting wheel has zigzagged from faceting camps in Texas to gem school in Bangkok, Thailand. These days he also serves as vice president of the Chicago Rocks & Minerals Society. 

It all started with a kid who couldn’t stop picking up rocks.

Pockets full of rocks

Yingst has been fascinated with rocks and minerals his entire life. Some of his favorite childhood memories are collecting Indian beads (crinoid fossils) with his mom and taking the train from Geneva to the Lizzadro Museum back when it was in Elmhurst. 

On family vacations in Missouri, while everyone else relaxed at the pool, he’d sit on the riverbank filling his pockets with treasures. 

“I’ve always felt more connected to the world through rocks and minerals,” he said.

Yingst’s introduction to the gem and jewelry industry came in 2022, when he attended New Approach School for Jewelers. There he was trained in metal fabrication, engraving, and, most importantly, stone setting. Stone setting opened his eyes to the world of faceted gemstones. 

“I fell in love with the light dancing through the stones,” he said. “This new perspective immediately established an appreciation for quality faceted gemstones that I consider in everything I do.”

During his time at New Approach, Yingst began to study the art of gem cutting, soaking up everything he could about the minerals that would become his craft. He ordered a rudimentary faceting machine for a couple hundred dollars and spent hours after school cutting the same stones, trying to understand the process. 

Eventually, however, he became stressed as he struggled to achieve his desired results — so he started looking for ways to expand his abilities.

It wasn’t easy. He started on Reddit and YouTube, learning through trial and error. While gem cutting is simple as a concept, mastering the craft without expert guidance would be a Herculean task. 

Finding his mentors

After graduating, Yingst decided to focus on custom jewelry, starting with a custom-cut stone. When a friend at school connected him with Larry Woods, a professional gem cutter, Yingst jumped at the chance to register for a weeklong intensive faceting camp in Texas. 

“Larry helped me connect the dots I was unable to connect while I was cutting alone, and I was excited,” he said. “I was the only student to finish seven stones in this beginner class. I cut all day and all night.”

This connection sparked his passion for cutting and opened the door to many possibilities. Yingst pushed further with his designs, participated in more courses with other experts, and learned more about the history of gem cutting. 

“Learning from different cutters opened my eyes to how much more I had yet to learn,” Yingst said.

His quest to understand the materials he was working with led Yingst to pursue a formal education in mineralogy at GIA (the Gemological Institute of America) in Bangkok, Thailand. He studied there before taking a job at Tsarina Jewels, a well-established gem manufacturer with a cutting factory near his house. There he learned Thai gem cutting and also saw the mass-production side of the industry, where gem cutting is practiced more as a service for the trade and viewed less as a creative outlet for cutters. 

“These conditions have influenced my perspective on gem cutting and given me a new respect for the process of cutting,” Yingst said.

A second life for flawed stones

Yingst soon fell in love with a specific kind of cutting: recutting gemstones. In the gem industry, most stones are sold by weight, so a bigger stone is worth more at the market. 

This economic reality influences the cutting style because a gem cutter’s incentive is to create the biggest stone possible. When cutters are trying to save weight, they often choose to sacrifice beauty in order to make more money.

Yingst is not a fan of this approach. 

“This push for higher weight retention creates a saturated market of poorly cut stones. Instead of buying costly new rough gemstones, I search for poorly cut gemstones that I will cut again with refined angles,” he said. “Buying these stones with the intent of recutting is beneficial because it allows you to accurately judge the color of a stone and check for any fractures and inclusions.”

Because these stones have often sat in a dealer’s inventory for a while, the seller can offer them at a lower price to close a sale. Yingst buys them and transforms them into far better, if smaller, pieces.

To cut and polish each facet, Yingst uses a faceting machine, which holds the stone at precise angles against a spinning disc coated in diamond grit. The only other tool he needs is a loupe, a small magnifying glass that jewelers use to check their work up close.

 “Gem cutters rely on their eyes along with the feeling and sound a gemstone makes against the diamond wheel,” Yingst said. “Balancing the machine with the pressure and angle of your hand allows the cutter to have precise control over each cut. The sound a gemstone makes against the lap is very important to understanding the correct pressure and technique needed.”

Closing the window

After purchasing this natural zircon (photo above) as a faceted stone in Sri Lanka, Yingst designed a custom cut to highlight the golden color while also reflecting white light back to the viewer as brilliance.

This style of cutting blends triangular facets to reflect white light with large rectangular facets that highlight the saturation of color.

Yingst bought this natural morganite (photo above) that had been cut to preserve weight over beauty. Deep facets at the wrong angles let light escape through the bottom of the stone, creating what’s called a window through the center. He changed the angles to close that window.

“By directing light through the stone and letting it escape through the crown, light is shot directly back to the observer,” Yingst said. “These light rays are perceived as flashes of color, known as dispersion, and flashes of white, known as brilliance.”

Reading the rough

Starting with a rough gemstone, Yingst removes any fractures and begins finding the stone’s shape by hand, which requires extensive experience and precise work. 

He also needs to position the stone properly. A dark stone may need angles that open it up and let light pass in and out. A pale stone may need a different facet pattern to bounce light around inside and deepen its color. 

“By understanding how different patterns and angles refract light through various materials, I play with unique combinations to produce colors and patterns that create a unique experience for the viewer,” he said. 

When he first started, a single stone could take him days, and he was often unhappy with the result. At Larry’s camp, he cut eight hours a day and finished one stone each day. Today, Yingst averages about two days per stone, from design to final polish. 

“Stones I cut are one-of-a-kind designs that are specially formulated for each project,” he said.

No undo button

Yingst said gem cutting has been one of the greatest tests of patience he has experienced. Each stage of the process is its own test. 

“The risk of a mistake never subsides,” he said. “Each material comes with a unique set of variables to consider, and mistakes can be extremely costly, forcing you to consider your moves carefully and find creative solutions.”

Now Yingst is experimenting with gem carving, the ancient lapidary art of shaping minerals, semiprecious stones, or organic gems into sculptural forms, relief designs, or engraved motifs through abrasion, grinding, and incision. 

“Unlike the stricter, mechanical process of cutting a stone, gem carving provides a more organic approach to lapidary work,” he said. “I appreciate the subtractive aspect of lapidary work, because once material is removed, it cannot be put back.”

Yingst wants people who see his work to experience a sense of mystery and connection. Everyone will experience a piece differently, which is his intention.

“Similar to the complex beauty of nature, the beauty is in the mystery of creation,” he said.

Show-and-tell for rock lovers

Busy as he is, Yingst still finds time to serve as vice president of the Chicago Rocks & Minerals Society. At GIA, he learned that his classmates were among his best resources. So when he met a former club president at the society’s annual gem show at the Rosemont Convention Center, the idea of a club built around shared knowledge clicked. 

The club meets the second Saturday of every month for a casual, classroom-style presentation, followed by show-and-tell, where members bring in rocks and minerals they’ve found or bought. 

Yingst also organizes field trips to quarries and rockhounding spots along Lake Michigan. Each year, the club helps run Chicagoland’s three large gem shows, which feature silent auctions and live gem-cutting demonstrations.

Yingst said it’s a great place for beginners, in large part because many members are retired mineral dealers with decades of stories and specimens to share. 

“The collective knowledge about rocks and minerals combined with the experience of the members has taught me more than I could’ve imagined,” he said. “Their experience helps to shape the way I view the world and has fundamentally shaped my love for the field of rocks and minerals.”

His advice for beginners

❝

“Learn from as many mentors as you can. Within the last few years, there’s been an amazing amount of public information made available to learn from. Social media may have glamorized gem cutting, but it’s given so many people access to previously elusive information. Though seeing a 30-second highlight video where a stone goes from rough to cut is amazing, and you can definitely learn a thing or two, it doesn’t always tell the whole story. Cutting a stone is a lot of work, and one of the most important aspects is to find joy in the process.”

Where to find his work

For now, the only place to see and buy Yingst’s work is via his Instagram, @markyingst, where available pieces are listed with a description and price in the caption.

Nominate a local artist for a profile

If you know someone who deserves to be featured in a Local Artist Profile piece in Tri-Cities Central, fill out this quick nomination form.

About the author of this piece

This piece was written by Ellen Jo Ljung, a longtime Geneva resident, author, award-winning educator, and glass artist. Visit her website to learn more.

📖 Thanks for reading

Please feel free to reach out to [email protected] with questions or comments.

Not signed up yet? Subscribe here.

Reply

Avatar

or to participate